Padraj Plastic Industries

PRODUCT DETAILS
Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting sockets. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.
* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
Size : 63x32 to 315x250

Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting sockets. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.

 

* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
Size 50X32 TO 315X280

 

PRODUCT DETAILS
Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting End Cap. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.
* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
* An Electrofusion fitting is composed of a polyethylene body in which wire coils and terminals are embedded at manufacturing stage. When charged through the terminals with the Electrofusion control unit, the coil is heated which is then transferred to the fitting and pipe.

PRODUCT DETAILS
Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting Saddle.These Saddle form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.
* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
* An Electrofusion fitting is composed of a polyethylene body in which wire coils and terminals are embedded at manufacturing stage. When charged through the terminals with the Electrofusion control unit, the coil is heated which is then transferred to the fitting and pipe.

PRODUCT DETAILS
Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting sockets. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.
* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
* An Electrofusion fitting is composed of a polyethylene body in which wire coils and terminals are embedded at manufacturing stage. When charged through the terminals with the Electrofusion control unit, the coil is heated which is then transferred to the fitting and pipe.
Size : 20mm to 315mm

PRODUCT DETAILS
Padraj Plastic Industries An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in PE fitting sockets. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.
* The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.
size : 20mm to 315mm

Padraj Plastic Industries An Electrofusion fitting is composed of a polyethylene body in which wire coils and terminals are embedded at manufacturing stage. When charged through the terminals with the Electrofusion control unit, the coil is heated which is then transferred to the fitting and pipe.
   Heat and the resulting pressure causes the surface to melt and bond at molecular level. If the correct procedure is followed, there is no separation between fitting and pipe at the point of fusion.
size : 20mm to 315mm

PADRAJ PLASTIC INDUSTRIES The wide range selection of high quality joining systems (Electrofusion and spigot fittings), machines, tools and accessories is representative of an informed and solution approach to our customers needs for high pressure systems.

An alternative form of welding polyethylene (poly or PE) is the Electrofusion system where heating elements are embedded in (PE or hdpe) fitting sockets. These sockets form part of a coupling or other fitting and require an electrical input from a welding machine to produce a welded joint.

HDPE Stub End (also called an HDPE Flange Adapter) is a short length of High-Density Polyethylene (HDPE) pipe that has one end flared outwards to form a flange face. It is used with a metal or HDPE backing ring to create a flanged joint for connecting HDPE pipelines to valves, pumps, or other pipeline equipment.

Key Features:

• Material: High-Density Polyethylene (PE100 / PE80).

• Design: One end for butt fusion welding to the HDPE pipe; the other end forms a flanged connection with a backing ring.

• Finish: Smooth inner bore for low friction and high flow efficiency.

• Size Range: Available from 20 mm to 630 mm (or customized sizes).

• Pressure Rating: PN 6, PN 10, PN 16, and PN 20.

• Color: Usually black with blue identification stripes.

Applications:

• Water supply and distribution networks

• Irrigation and agricultural pipelines

• Industrial fluid and chemical transport

• Sewage and wastewater systems

• Connecting HDPE pipelines to steel or PVC systems

Advantages:

• Corrosion and chemical resistant.

• Lightweight yet high strength.

• Leak-proof and durable when properly fused.

• Easy to install, remove, and reassemble.

• Long service life with minimal maintenance.

How It Works:

The stub end is butt-fused to the HDPE pipe, and a metal backing ring (flange ring) is slipped over the flared end. This allows the joint to be bolted to another flanged component — providing a strong, detachable connection without needing a full welded joint.